High-Density WLAN Design
Size for capacity and airtime, choose channels, cells and antennas, decide the AP generation and the network behind it, and defend the design to the customer with numbers.
Taught in Spanish for now. The English version arrives once the Spanish one is finished and recorded.
When you finish you will be able to
- Justify with an airtime calculation why a dense space is sized for capacity
- Produce a project's assumptions sheet: devices, concurrency, applications and peak
- Decide the channel width and the reuse plan for a dense space
- Compare two cell and antenna designs by APs, neighbors, utilization and cost
- Design the airtime budget: SSIDs, broadcast and end-to-end QoS
- Decide the AP generation (Wi-Fi 6, 6E or 7) based on the clients that will show up
- Size PoE, uplinks, internet uplink and DHCP so they don't become the bottleneck
- Produce and defend the complete design document to the client
Who it is for
- You design or quote Wi-Fi for classrooms, auditoriums, meeting rooms or events
- You are presales or an engineer who must justify how many APs and why
- You finished Site Survey or Troubleshooting and want to move on to deciding
Who it is not for
You have never measured in dBm or built a channel plan: start with Wi-Fi Installation and Site Survey (N2)
You want to configure a specific vendor: this course decides, it does not configure
This course is being produced module by module. Write to me if you are interested and I will tell you when it opens.
Notify me when it opensPrice: announced when enrollment opens. For teams, a tailored proposal.
Syllabus
8 modules, 24 h
- 01Capacity, Not Coverage
- 02Requirements and Assumptions
- 03Spectrum and Channels
- 04Small Cells: Power, Rates and Antennas
- 05What Shares the Air: SSIDs, Broadcast and QoS
- 06Wi-Fi 6, 6E and 7 in the Design
- 07The Network That Supports It
- 08The Design Document and Its Defense
Where do we start?
Tell me who needs training and in what. I'll tell you which level they need, even if it isn't one of my courses.
Talk to an instructor