Network training, taught by an engineer who runs them.
Data & IP and Wi-Fi, in four levels: from someone who has never seen a switch to someone who has to size the network. Microwave and fiber, in preparation. No filler, no stock slides.
An Administration desk lost its network right after a new laptop was plugged in. What happened on its port?
SW-P1# show port-security interface fa0/9
Port Security : Enabled
Port Status : Secure-shutdown
Violation Mode : Shutdown
Maximum MAC Addresses : 1
Last Source Address:Vlan : 00a0.c9b1.2233:20
Security Violation Count : 1 Show the answer
Port security allows a single MAC and another one arrived: the port shut down (Secure-shutdown, one violation). First fix the cause, authorise the new MAC or remove the device; then shutdown and no shutdown.
From module 2 of Layer 2/3 Troubleshooting
Four levels per specialty
The level is not a marketing label: it changes the entire content. The same topic at N1 and N3 does not share a single slide.
| Vertical | N1 Fundamentals | N2 Technician | N3 Specialist | N4 Design |
|---|---|---|---|---|
| Data & IP | ||||
| Wi-Fi |
Also in preparation: courses in Microwave and in Fiber & access.
Course page published, enrollment not open yet.
Pick your level, take the course, get certified
Pick your level
Tell me what you do today and I'll tell you whether you belong at N1, N2 or N3. It's free and prevents the wrong enrollment, which is the worst outcome for both of us.
Take the course
Live with an instructor or at your own pace. Step-by-step diagrams, labs on free tools, and hands-on practice in every module.
Get certified
Certificate of achievement with a unique ID, not an attendance slip. On the back, what you can actually do.
What people ask before enrolling
Do I need my own equipment or lab?
No. Labs are illustrated: the topology, a terminal with the prompt already written, and the real output to check your answer. They work on any computer, with no simulator to install. If you have a switch or an access point you can repeat them on it, but you don’t need to.
Which level is right for me?
If you have never configured anything, N1. If you install and verify but don’t troubleshoot, N2. If you get the tickets nobody else can close, N3. If you have to justify an architecture decision to a client, N4. Every course page also says who it is not for.
Does the course count toward a DC-3 (Mexico)?
Yes. SAREA is registered with Mexico’s labor ministry (STPS) as an external training provider, so training your company contracts can be documented with the DC-3 form. It is separate from SAREA’s certificate of achievement, which is awarded at 80% or more on the final assessment.
Is there an English version?
For now courses are taught in Spanish. Each course gets its English version once the Spanish one is finished and recorded, and every course page says which languages it is available in today. Protocol names, commands and standards stay in English in both versions, because that is how you will meet them in the CLI.
Can my whole team take the courses?
Yes. Each person takes the course at the level that matches their role, at their own pace, and everyone who passes gets a certificate with an ID. Tell me how many people and which roles and I will put together a proposal: see the For teams page.
Where do we start?
Tell me who needs training and in what. I'll tell you which level they need, even if it isn't one of my courses.
Talk to an instructor