Layer 2/3 Troubleshooting
When the network fails and the fault isn't on any checklist: a method to isolate the cause layer by layer, and seven real symptoms, from the port that won't pass traffic to the missing prefix. Every conclusion backed by the output that proves it. Cisco IOS, with illustrated labs.
Taught in Spanish for now. The English version arrives once the Spanish one is finished and recorded.
When you finish you will be able to
- Apply a layer-by-layer isolation method to decide where to look before touching anything
- Troubleshoot an up port that won't pass traffic: VLAN, trunk, err-disabled or ACL
- Follow a frame switch to switch and troubleshoot why two hosts in the same VLAN can't reach each other
- Interpret interface counters and tell a physical, duplex or congestion fault apart
- Troubleshoot a layer 2 loop and justify the missing protection
- Troubleshoot inter-subnet faults: default gateway, SVI, inter-VLAN routing and HSRP
- Troubleshoot a missing prefix: OSPF adjacency, advertisement, filtering or preference
- Troubleshoot MTU and asymmetric paths, and separate several faults with their evidence
Who it is for
- You finished Switching and VLANs and want to solve faults that aren't on the checklist
- You work in support or a NOC, and every ticket starts with «the network is slow»
- You want to prove a cause with evidence instead of rebooting until it works
Who it is not for
You've never used the IOS CLI or set up a VLAN: start with Switching and VLANs (N2)
You're after BGP, MPLS or EVPN: they're in Routing: From OSPF to BGP and MPLS (N3)
You need to design a new network: that's N4
The syllabus is final and the course opens soon. Write to me and I will tell you as soon as enrollment opens.
Notify me when it opensPrice: announced when enrollment opens. For teams, a tailored proposal.
Syllabus
8 modules, 24 h
- 01The Method: Isolate Before You Touch
- 02The Port Is Up/Up but Passes No Traffic
- 03Two Hosts in the Same VLAN Can't See Each Other
- 04Intermittency and Packet Loss
- 05The Network Goes Down When a Cable Is Plugged In
- 06Can't Reach Another Subnet
- 07A Prefix Is Missing from the Routing Table
- 08Slow Only to Some Destinations, and the Final Case
Where do we start?
Tell me who needs training and in what. I'll tell you which level they need, even if it isn't one of my courses.
Talk to an instructor